80V Electric Pneumatic
The Toyota 80V Electric holds its own against mid-capacity internal combustion trucks, even for rugged outdoor jobs. Tough enough for construction sites: brick, block and pipe. Concrete. Oil and gas. And the perfect pairing for wineries, orchards and other agricultural applications where diesel emissions may affect the product and tourist experience. With a 4,000 to 11,000 lb. capacity, the 80V tackles them all. Delivering the performance, you demand, with zero emissions.
Want to maintain an all-electric fleet, but need a rugged, outdoor solution? Look no further than Toyota’s Electric Pneumatic forklift. Powerful and rugged enough to perform like internal combustion counterparts, but running off a battery, Toyota’s Electric Pneumatic forklift maintains clean air and low maintenance, but supports powerful, outdoor, traditionally internal combustion (IC) applications.
- 4,000 – 11,000 lb. capacity
- Unmatched travel speeds
- Outstanding lifting performance
- Superior uptime
- Competitive operating time
- Electric benefits, IC performance
- System of Active Stability™ (SAS) acts automatically in uncertain situations to protect operator, and reduce product and forklift damage
- Excellent overhead guard visibility even with optional cab; wide-view mast options available
- Twice the run time of 36- or 48-volt competitors
- Extreme versatility for a broad spectrum of applications, with capacity and power of IC plus clean emissions of an electric
- Extra durable IC-strength, tough truck body with no plastic parts
- Easily programmable to fit user preferences and aid serviceability
- Lift/lower speed control automatically slows mast as it comes into free lift and dramatically slows forks near ground to reduce damage and wear
Specifications
| MODEL NUMBER | LOAD CAPACITY* (LBS.) | MAX. TRAVEL SPEED FULL LOAD (MPH) | MAX. LIFT SPEED FULL LOAD (FPM) | MAX. GRADEABILITY FULL LOAD (%) | BASIC RIGHT ANGLE STACK** (IN.) |
|---|---|---|---|---|---|
| 05-8FBM20T | 4,000 | 11.8 | 96 | 26 | 95.4 |
| 05-8FBM25T | 5,000 | 11.8 | 91 | 24 | 100.7 |
| 05-8FBMK25T | 5,000 | 11.8 | 91 | 25 | 95.4 |
| 05-8FBM30T | 6,000 | 11.8 | 75 | 22 | 101.5 |
| 05-8FBMK30T | 6,000 | 11.8 | 75 | 21 | 97.3 |
| 05-8FBM35T | 7,000 | 11.8 | 69 | 19 | 102.6 |
| 8FBM40T | 8,000 | 11 | 68.9 | 15 | 120.5 |
| 8FBM45T | 9,000 | 11 | 68.9 | 14 | 121.1 |
| 8FBM50T | 11,000 | 11 | 65 | 13 | 126.5 |
* Based on 24″ Load center
** Add load length and clearance
Details of specifications and equipment may change without notice.
Performance
- UL-E conformity
- 80-volt electrical system
- 3-way hydraulic control valve
- Digital multifunction display
- Regenerative braking
- AC controller with MOSFET design
- Transistor controlled AC lift and drive motors
Operability / Ergonomics
- ORS non-suspension vinyl seat
- Retractable seat belt (non-clinching)
- Heavy-duty non-slip floor mat
- Memory tilt steering column
Safety
- System of Active Stability (SAS)™
- Operator Presence Sensing System (OPSS)
- Double-action parking brake
- Electric horn
- Overhead guard
Ease of Service
- AC drive motor (no brushes or commutator)
- AC Hydraulic motor (no brushes or commutator)
- Easy access no-tools floorboard
- Battery compartment hood assist
- Planned Maintenance Indicator
- Can-bus controller wiring
Optional Equipment
- T-Matics Vehicle Management System
- Cabin (steel, comfort or canvas)
- Integral sideshifter
- Cascade hang-on sideshifter
- Cold storage, rustproof or fisherman spec models
Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.
| MODEL NUMBER | LOAD CAPACITY* (LBS.) | MAX. TRAVEL SPEED FULL LOAD (MPH) | MAX. LIFT SPEED FULL LOAD (FPM) | MAX. GRADEABILITY FULL LOAD (%) | BASIC RIGHT ANGLE STACK** (IN.) |
|---|---|---|---|---|---|
| 05-8FBM20T | 4,000 | 11.8 | 96 | 26 | 95.4 |
| 05-8FBM25T | 5,000 | 11.8 | 91 | 24 | 100.7 |
| 05-8FBMK25T | 5,000 | 11.8 | 91 | 25 | 95.4 |
| 05-8FBM30T | 6,000 | 11.8 | 75 | 22 | 101.5 |
| 05-8FBMK30T | 6,000 | 11.8 | 75 | 21 | 97.3 |
| 05-8FBM35T | 7,000 | 11.8 | 69 | 19 | 102.6 |
| 8FBM40T | 8,000 | 11 | 68.9 | 15 | 120.5 |
| 8FBM45T | 9,000 | 11 | 68.9 | 14 | 121.1 |
| 8FBM50T | 11,000 | 11 | 65 | 13 | 126.5 |
* Based on 24″ Load center
** Add load length and clearance
Details of specifications and equipment may change without notice.
- UL-E conformity
- 80-volt electrical system
- 3-way hydraulic control valve
- Digital multifunction display
- Regenerative braking
- AC controller with MOSFET design
- Transistor controlled AC lift and drive motors
- ORS non-suspension vinyl seat
- Retractable seat belt (non-clinching)
- Heavy-duty non-slip floor mat
- Memory tilt steering column
- System of Active Stability (SAS)™
- Operator Presence Sensing System (OPSS)
- Double-action parking brake
- Electric horn
- Overhead guard
- AC drive motor (no brushes or commutator)
- AC Hydraulic motor (no brushes or commutator)
- Easy access no-tools floorboard
- Battery compartment hood assist
- Planned Maintenance Indicator
- Can-bus controller wiring
- T-Matics Vehicle Management System
- Cabin (steel, comfort or canvas)
- Integral sideshifter
- Cascade hang-on sideshifter
- Cold storage, rustproof or fisherman spec models
Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.
Download the 80V Electric Pneumatic brochure
With high-load capacity capabilities, pneumatic tires and zero emissions, the Toyota Electric Pneumatic forklift is an environmentally-friendly outdoor solution. Download a brochure to uncover the secret of IC power in an electric.