Long, hard days and big, heavy loads. The powerful, durable Toyota Mid IC Pneumatic makes light works of both, giving you more muscle to keep going as long as it takes. Plus, better ergonomics for increased operator comfort and productivity. And pneumatic tires for stable performance on uneven surfaces and rough terrain. It’s as strong as the day is long.

MAKE THE SWITCH: Now through December 31, trade in any LP, dual fuel or gasoline forklift and receive a rebate up to $2,500 on a Toyota diesel model. LEARN MORE >

The Toyota Mid IC Pneumatic forklift, with a capacity of 8,000 – 11,000 lbs., is a premier material handling solution for mid-capacity outdoor applications. Powerful, durable and engineered with ergonomics in mind, the Mid IC Pneumatic Forklift is ideal for long days in the lumber yard, on construction sites and most other outdoor applications.

  • 8,000 – 11,000 lb. capacity
  • 7 mph travel speed
  • SAS tilt-leveling forks
  • 20% more fuel efficient (gas)
  • 30% more fuel efficient (diesel)
  • System of Active Stability (SAS) unique to Toyota forklifts, helps prevent tip-overs
  • Active Mast Control (AMC) responds automatically to enhance stability of loads handled at high lift heights
  • Forward tilt angle control and rear tilt speed control act automatically in uncertain situations to protect operator, and reduce product and forklift damage
  • One-way automatic fork leveling levels forks parallel to the ground from back tilt position with the push of a button
  • Structurally rugged mast channel design provides maximum load capacity retention by limiting mast deflection
  • Control Area Network (CAN-Bus) communication technology for quicker, more reliable control of truck functions with fewer components
  • Durability by design including tilt cylinder protection boots, stamped steel engine hood, fully sealed air intake, plate-iron front fenders and moisture-resistant electrical connections
  • Reinforced load backrest extension with recessed fasteners reduces potential for product damage
  • Standard 4-way adjustable full-suspension seat is wider with no hip restraints for easier entry/exit than competitor’s seats; weight adjustable for greater operator comfort
  • Improved ergonomics including dash-mounted instrument display, load-sensing power steering, 11.8” steering wheel, dash-integrated amenity tray and oversized cup holder
  • Welded, roll-formed overhead guard pillars provide maximum operator protection with improved entry/exit and load visibility
  • Pneumatic tires (solid or air-filled) for strong grip on rough surfaces and uneven terrain

SPECIFICATIONS

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. LIFT SPEED FULL LOAD (FPM)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
8FD35U8,00013.110343122.5
8FG35U8,00013.710342122.5
8FD40U9,00013.110339124.5
8FG40U9,00013.710338124.5
8FD45U10,00013.19435129.5
8FG45U10,00013.79434129.5
8FD50U11,00013.19431132.5
8FG50U11,00013.79431132.5

Performance

  • EPA/CARB certified engines
  • Integrated monitoring system
  • Controller Area Network (CAN-BUS) communication
  • Moisture resistant electric connectors
  • Integrated headlight and turn signal lever
  • Engine protection system

Ergonomics/Operability

  • Dash mounted instrument display
  • 11.8″ diameter two-spoke steering wheel
  • Load sensing hydrostatic steering
  • Cowl-mount hydraulic control levers with rubber boot covers
  • 12″ long dual operator assist grips
  • Low wide-entry steps
  • 4-Way adjustable vinyl full-suspension seat

Safety

  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Asbestos free components
  • Neutral engine start safety switch

Ease of Service

  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Easy lift engine hood with wide 75° opening

Optional equipment

• •

  • T-Matics Vehicle Management System
  • Mini-lever controls with Ergoshift
  • Rightline integral side shifter
  • Multi-function display
  • Steel cab
  • Single brake pedal
  • EZ Pedal
  • Front combination lights
  • LED headlight

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. LIFT SPEED FULL LOAD (FPM)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
8FD35U8,00013.110343122.5
8FG35U8,00013.710342122.5
8FD40U9,00013.110339124.5
8FG40U9,00013.710338124.5
8FD45U10,00013.19435129.5
8FG45U10,00013.79434129.5
8FD50U11,00013.19431132.5
8FG50U11,00013.79431132.5
  • EPA/CARB certified engines
  • Integrated monitoring system
  • Controller Area Network (CAN-BUS) communication
  • Moisture resistant electric connectors
  • Integrated headlight and turn signal lever
  • Engine protection system
  • Dash mounted instrument display
  • 11.8″ diameter two-spoke steering wheel
  • Load sensing hydrostatic steering
  • Cowl-mount hydraulic control levers with rubber boot covers
  • 12″ long dual operator assist grips
  • Low wide-entry steps
  • 4-Way adjustable vinyl full-suspension seat
  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Asbestos free components
  • Neutral engine start safety switch
  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Easy lift engine hood with wide 75° opening
  • T-Matics Vehicle Management System
  • Mini-lever controls with Ergoshift
  • Rightline integral side shifter
  • Multi-function display
  • Steel cab
  • Single brake pedal
  • EZ Pedal
  • Front combination lights
  • LED headlight

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

DOWNLOAD THE MID IC PNEUMATIC BROCHURE

Toyota’s Mid IC Pneumatic forklift is a popular option for mid-duty applications and makes long work days more enjoyable and efficient. Download a brochure to see the power and ergonomics of the Toyota Mid IC Pneumatic – a hard day’s workhorse.