Take on the most demanding jobs – tough outdoor applications very much included. Construction sites. Lumberyards. Indoor/outdoor warehouses. With the Toyota Core IC Pneumatic, the stability and power are in your hands. Get ready to get stuff done.

MAKE THE SWITCH: Now through December 31, trade in any LP, dual fuel or gasoline forklift and receive a rebate up to $2,500 on a Toyota diesel model. LEARN MORE >

Wildly durable and engineered with ergonomics in mind, the Core IC Pneumatic forklift can maneuver almost anything. With a lift capacity range of 3,000-6,500 lbs., the Toyota Core IC Pneumatic forklift is the premier material handling solution for most outdoor applications.

  • 3,000 – 6,500 lb. capacity
  • 10.9 – 11.8 mph travel speed with full load
  • Industry’s top-selling forklift
  • SAS tilt-leveling forks
  • System of Active Stability (SAS) unique to Toyota forklifts, helps prevent tip-overs
  • Active Mast Control (AMC) responds automatically to enhance stability of loads handled at high lift heights
  • Forward tilt angle control and rear tilt speed control act automatically in uncertain situations to protect operator, and reduce product and forklift damage
  • One-way automatic fork leveling levels forks parallel to the ground from back tilt position with the push of a button
  • Structurally rugged mast channel design provides maximum load capacity retention by limiting mast deflection
  • Control Area Network (CAN-BUS) communication technology for quicker, more reliable control of truck functions with fewer components
  • Durability by design including tilt cylinder protection boots, stamped steel engine hood, fully sealed air intake, plate-iron front fenders and moisture-resistant electrical connections
  • Reinforced load backrest extension with recessed fasteners reduces potential for product damage
  • Standard 4-way adjustable full-suspension seat is wider with no hip restraints for easier entry/exit than competitor’s seats; weight adjustable for greater operator comfort
  • Improved ergonomics including dash-mounted instrument display, load-sensing power steering, 11.8” steering wheel, dash-integrated amenity tray and oversized cup holder
  • Welded, roll-formed overhead guard pillars provide maximum operator protection with improved entry/exit and load visibility
  • Pneumatic tires (solid or air-filled) for strong grip on rough surfaces and uneven terrain

Specifications

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
8FDU153,00011.81284591.9
8FGU153,00011.51314592.1
8FDU183,50011.81284593.9
8FGU183,50011.51314593.9
8FDU204,00011.812139103.2
8FGU204,00010.911841103.2
8FDU255,00011.812133105.9
8FGU255,00010.911834105.9
8FDU306,00011.89829111.4
8FGU306,00011.89829111.4
8FDU326,50011.59828112.4
8FGU326,50011.210026112.4

* Based on 24″ Load center
** Add load length and clearance

Details of specifications and equipment may change without notice.

Performance

  • Technician Programmable Speed Control
  • Fully-stamped steel side panels
  • Moisture resistant electric connectors
  • EPA/CARB certified gasoline engine
  • Integrated monitoring system
  • One-way automatic fork leveling

Ergonomics / Operability

  • Dash mounted instrument display
  • 11.8″ diameter two-spoke steering wheel
  • Load Sensing Hydrostatic Steering
  • Heavy-duty non-slip rubber floor mat
  • Cowl-mount hydraulic control levers with rubber boot covers
  • 4-Way adjustable vinyl full-suspension seat
  • 12″ long dual operator assist grips

Safety

  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Electric horn
  • Neutral engine start safety switch

Ease of Service

  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Externally mounted hydraulic oil return filter
  • Dash mounted brake fluid level check
  • Easy lift engine hood with wide 75° opening

Optional equipment

  • T-Matics Vehicle Management System
  • Cascade sideshifter with bronze upper bushing
  • Steel cab
  • LPG swing down bracket
  • Low LPG fuel warning indicator
  • Multi-function display LED rear work light
  • Fire extinguisher
  • CNG powered

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
8FDU153,00011.81284591.9
8FGU153,00011.51314592.1
8FDU183,50011.81284593.9
8FGU183,50011.51314593.9
8FDU204,00011.812139103.2
8FGU204,00010.911841103.2
8FDU255,00011.812133105.9
8FGU255,00010.911834105.9
8FDU306,00011.89829111.4
8FGU306,00011.89829111.4
8FDU326,50011.59828112.4
8FGU326,50011.210026112.4

* Based on 24″ Load center
** Add load length and clearance

Details of specifications and equipment may change without notice.

  • Technician Programmable Speed Control
  • Fully-stamped steel side panels
  • Moisture resistant electric connectors
  • EPA/CARB certified gasoline engine
  • Integrated monitoring system
  • One-way automatic fork leveling
  • Dash mounted instrument display
  • 11.8″ diameter two-spoke steering wheel
  • Load Sensing Hydrostatic Steering
  • Heavy-duty non-slip rubber floor mat
  • Cowl-mount hydraulic control levers with rubber boot covers
  • 4-Way adjustable vinyl full-suspension seat
  • 12″ long dual operator assist grips
  • System of Active Stability (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Electric horn
  • Neutral engine start safety switch
  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Externally mounted hydraulic oil return filter
  • Dash mounted brake fluid level check
  • Easy lift engine hood with wide 75° opening
  • T-Matics Vehicle Management System
  • Cascade sideshifter with bronze upper bushing
  • Steel cab
  • LPG swing down bracket
  • Low LPG fuel warning indicator
  • Multi-function display LED rear work light
  • Fire extinguisher
  • CNG powered

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

DOWNLOAD THE IC CORE PNEUMATIC BROCHURE

More power for big loads. More durability for heavy, harsh conditions. More grip for rough, uneven surfaces. More material-handling prowess to knock off every item on your outdoor to-do list. Whatever the challenge, the Core IC Pneumatic is up for it. Download a brochure to see why the Toyota Core IC Pneumatic is one tough customer.