High-Capacity IC Pneumatic (5FD)

You call them lumberyards. Construction site. Ports and docks. Foundries. The Toyota High-Capacity IC Pneumatic forklift calls them home. Built tough to thrive in outdoor environments, built strong to handle your most demanding applications, it’s here to get things done.

The Toyota 5FD High-Capacity IC Pneumatic forklift makes even the toughest jobs feel less demanding. Strength, durability and reliability are all standard equipment. It’s a proven heavy hitter tough enough for your toughest jobs. Depend on it.

 

 

 

  • 22,000 – 35,000 lb. capacity
  • Operator presence sensing
  • Hino 7.68 liter, 6-cylinder, turbocharged diesel engine
  • EPA/CARB-certified Tier 4 Final
  • Enclosed operator cabin
  • Engine monitoring system
  • Precision hydrostatic power steering for ultimate control and ultra-precise maneuverability in confined work areas
  • Exclusive synchronized steering positions steering wheel and steering tires for optimum comfort and clear visibility of gauges
  • Hino 7.68 liter, 6-cylinder EPA/CARB-certified/EPA Tier 4 Final diesel engine with common rail fuel system, water-cooled EGR valve, turbocharger and intercooler for more power from a low-noise, low-vibration, low-exhaust emission power plant
  • Independent brake and inching control pedals for excellent stopping power and precise positioning
  • Air-over-hydraulic wet disc brakes for excellent stopping power under the most extreme condition
  • Automatic 2-speed transmission with 2-stator torque converter delivers 3-speed comparable performance with smoother operation from fewer shifts
  • Integrated monitoring system helps reduce downtime by alerting operator to maintenance issues early
  • Excellent visibility thanks to low-profile cowl design, slim profile steering column and exceptional through-mast visibility
  • Advanced ergonomics including full-floating operator compartment for optimal comfort and increased productivity
  • Axtech® heavy-duty planetary drive axle for maximum durability
  • Heavy-duty steer axle constructed from thick plate steel
  • Fully oil-charged lift cylinders for additional corrosion resistance and leak protection
  • Easy service access thanks to hydraulic multi-gauge and easy-access panels and filters

Specifications

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
5FD10022,00017.49154185
5FD11525,00017.48945185.8
5FD12026,00017.48943185.8
5FD13530,00017.46938198.4
5FDK15033,00017.46733198.8
5FDK16035,000186730204.7

* Based on 24″ Load center 
** Add load length and clearance

 

Details of specifications and equipment may change without notice.

Performance

  • Wet disc brakes with dedicated oil cooling system
  • Engine protection system
  • Centralized grease lubrication
  • Full hydraulic power steering with synchronized steering
  • Upswept exhaust
  • All wheel rotatable tires

Ergonomics

  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
  • Tinted glass
  • Dome light

Safety

  • Asbestos free components
  • Neutral safety switch
  • Operator presence sensing system (OPSS)
  • Electrical horn
  • Neutral safety switch
  • Integrated overhead guard
  • Orange forks

Ease of Service

  • Engine monitoring system
  • All-wheel rotatable tires
  • Centralized grease lubrication (mast, rear axle)
  • Tilt-able cabin for engine access

Optional Equipment

  • 2-speed transmission (2 forward/2 reverse)
  • Swivel seat
  • Pre-cleaner
  • Heater with defrost
  • Air conditioning
  • Overhead guard sheet
  • Steering wheel with knob

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

MODEL NUMBERLOAD CAPACITY* (LBS.)MAX. TRAVEL SPEED FULL LOAD (MPH)MAX. LIFT SPEED FULL LOAD (FPM)MAX. GRADEABILITY FULL LOAD (%)BASIC RIGHT ANGLE STACK** (IN.)
5FD10022,00017.49154185
5FD11525,00017.48945185.8
5FD12026,00017.48943185.8
5FD13530,00017.46938198.4
5FDK15033,00017.46733198.8
5FDK16035,000186730204.7

* Based on 24″ Load center 
** Add load length and clearance

 

Details of specifications and equipment may change without notice.

  • Wet disc brakes with dedicated oil cooling system
  • Engine protection system
  • Centralized grease lubrication
  • Full hydraulic power steering with synchronized steering
  • Upswept exhaust
  • All wheel rotatable tires
  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
  • Tinted glass
  • Dome light
  • Asbestos free components
  • Neutral safety switch
  • Operator presence sensing system (OPSS)
  • Electrical horn
  • Neutral safety switch
  • Integrated overhead guard
  • Orange forks
  • Engine monitoring system
  • All-wheel rotatable tires
  • Centralized grease lubrication (mast, rear axle)
  • Tilt-able cabin for engine access
  • 2-speed transmission (2 forward/2 reverse)
  • Swivel seat
  • Pre-cleaner
  • Heater with defrost
  • Air conditioning
  • Overhead guard sheet
  • Steering wheel with knob

Contact Toyota Material Handling Solutions for a complete list of optional equipment; and compatibility conditions and restrictions.

Download the 5FD High-Capacity IC Pneumatic brochure

Built to carry the day. Prepare to have them exceeded. Strength, durability and reliability are all standard equipment on Toyota’s 5FD High-Capacity IC Pneumatic forklift. Download a brochure to see how this proven heavy hitter is tough enough for your toughest jobs.